Installing/Removing Battery Tray - Invacare P9000 XDT Operating & Maintenance Manual

4. Place rear battery box onto the battery
tray and connect the rear battery box to
the front battery box.
5. Connect the front battery box to the
controller.
WARNING
The battery box retaining strap MUST
be fastened securely and adjusted prop-
erly to hold battery boxes in place
before using the wheelchair.
6. Connect the battery box retaining strap
clip together and adjust if necessary.

Installing/Removing Battery Tray

NOTE: For this procedure, refer to FIGURE 11.4.
NOTE: To remove the battery tray from the wheelchair, reverse the following procedure.
1. Attach the key slot bracket located at the front of the battery tray over the crossbrace
bolt bushing under the seat upholstery of the wheelchair.
2. Attach the hanger brackets to the wheelchair frame.
Key Slot Bracket
Hanger
Bracket
Battery Tray
Part No. 1118386
Wheelchair Frame
FIGURE 11.4 Installing/Removing Battery Tray
To Controller
Battery
Tray
Front
Battery
Box
Rear
Battery
Box
FIGURE 11.3 Removing/Installing the
Battery Boxes
51
SECTION 11—BATTERIES
Front Battery
Box Connectors
Rear Battery
Box Connector
Retaining
Strap
Retaining Strap Clip
Crossbrace Bolt Bushing
™
P9000 XDT