NOTE: For this procedure, refer to FIGURE 6.4.
1. To raise the elevating legrest, the assistant should hold the support tube and raise
elevating legrests until the desired height is obtained.
2. To lower the elevating legrest, perform the following:
A. Support user leg with one (1) hand.
B. Push release lever downward with other hand.
C. Gently, lower user leg down and rest against the legrest.
FIGURE 6.4 Raising/Lowering the Legrest Assembly
Part No. 1118386
SECTION 6—FRONT RIGGINGS
Release
Lever
Support
Tube
37
™
P9000
XDT