License Plate Lamp; Replacement Bulbs - Chevrolet Volt 2013 Owner's Manual

License Plate Lamp

To replace one of these bulbs:
1. Press the spring clip on the right
end of the lamp assembly to the
left to unlock the lamp assembly.
2. Pull down on the lamp assembly
to remove it from the fascia.
3. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket (1).
5. Push the replacement bulb
straight into the bulb socket (1)
and turn the bulb socket (1)
clockwise to install it into the
lamp assembly (3).
6. Reinstall the lamp assembly (3)
into the fascia by inserting the
left side first.
Vehicle Care
7. Push the spring clip side into
place.

Replacement Bulbs

Exterior Lamp
Back-Up Lamps
High/Low Beam
Headlamps
License Plate
Lamps
For replacement bulbs not listed
here, contact your dealer.
10-29
Bulb
Number
3157K
HIR2 (9012)
W5W LL