operation. Normal operation of the
system will return after the vehicle
has been turned on.
Activating the Remote Start
1. Aim the RKE transmitter at the
vehicle.
Q
2. Press and release
RKE transmitter; the doors
will lock.
3. Immediately, press and hold
until the turn signal lamps flash,
or for approximately
two seconds. Pressing
during a remote start will turn the
feature off.
After entering the vehicle during a
remote start, press the POWER
button on the center stack with the
brake pedal applied to operate as
normal.
Canceling Remote Start
To cancel a remote start, do any of
the following:
Aim the RKE transmitter at the
vehicle and press and hold
until the parking lamps turn off.
Turn on the hazard warning
on the
flashers.
Press the POWER
B
the center stack, with the brake
pedal applied, then press the
POWER
B
the vehicle off.
again
See Remote Start on page 2 8.
B
button on
button again to turn
In Brief
Door Locks
Keyless Access
When the Remote Keyless Entry
(RKE) transmitter is within 1 m (3 ft)
of the driver door, the door can be
locked and unlocked by pressing
the door handle button. When
unlocking from the driver door, the
first press will unlock only that door;
press again within five seconds to
unlock all passenger doors. See
Remote Keyless Entry (RKE)
System Operation on page 2 2.
1-5