Chevrolet Volt 2013 Owner's Manual page 234

9-48 Driving and Operating
near the tire sealant and
compressor kit (3). Pull up on
the charge cord handle (4) to
release it from the handle clip.
Lift the charge cord up and
rearward to remove it from the
vehicle. The vehicle plug (2) is
stored as shown.
3. Plug the charge cord into the
electrical outlet. See Electrical
Requirements for Battery
Charging on page 9 54. Verify
the charge cord status. See the
charge cord user guide. See
Charge Cord on page 9 53.
Select the appropriate charge
level using the Select Charge
Level Preference screen on the
center stack. See Charge Level
Selection under Programmable
Charging on page 5 29.
4. Plug in the vehicle plug of the
charge cord into the charge port
on the vehicle. Verify that the
charging status indicator
illuminates on top of the
instrument panel and a horn
chirp occurs. See Charging
Status Feedback on page 9 49.
5. To arm the charge cord theft
alert, lock the vehicle with the
RKE transmitter. To disable this
feature, see Charge Cord Theft
Alert in Vehicle Personalization
on page 5 51.
End Charge
1. Unlock the vehicle with the RKE
transmitter to disarm the charge
cord theft alert.
2. Unplug the vehicle plug of the
charge cord from the vehicle.
3. Close the charge port door by
pressing firmly in the center to
latch properly.
4. Unplug the charge cord from the
electrical outlet.
5. Place the charge cord into the
storage compartment.