Chevrolet Volt 2013 Owner's Manual page 160

Hide thumbs Also See for Volt 2013:
Table of Contents

Advertisement

5-54
Instruments and Controls
To turn the remote start auto heated
seats on or off:
1. Press the Vehicle
Settings menu.
2. Select Climate and Air Quality.
3. Turn the remote start auto
heated seats feature on or off.
4. Press Back to return to the
previous menu.
Auto Defog
When on and high humidity is
detected, the climate control system
will adjust the outside air, air
conditioner, or heat to decrease
fogging. The fan speed may
increase. When high humidity is no
longer detected, the system will
return to previous operation.
To turn the auto defog on or off:
1. Press the Vehicle
Settings menu.
2. Select Climate and Air Quality.
3. Turn the auto defog feature on
or off.
4. Press Back to return to the
previous menu.
Engine Assisted Heating
If equipped, this feature selects the
outside temperature level at which
the engine may run to assist heating
in Electric Mode. A change in
selection will not take affect until
after the vehicle is first
powered down.
The Engine Assisted Heating
options are:
At Cold Outside Temperatures,
below approximately 2°C (35°F).
At Very Cold Outside
Temperatures, below
approximately 10°C (15°F).
To select the outside temperature
level at which the engine may run to
assist heating in electric mode:
1. Press the Vehicle
Settings menu.
2. Select Climate and Air Quality.
3. Select Engine Assisted Heating.
4. Select the temperature level.
5. Press Back to return to the
previous menu.
Engine Assisted Heating
(Plugged-In)
If equipped, this feature turns on or
off the ability for the engine to run to
help heat the vehicle when it is
plugged in. A change in setting will
not take affect until after the vehicle
is first powered down.
The Engine Assisted Heating
(Plugged-In) options are:
On
Off
To turn the Engine Assisted Heating
(Plugged-In) on or off:
1. Press the Vehicle
Settings menu.
2. Select Climate and Air Quality.
3. Turn the engine assisted heating
(Plugged-In) feature on or off.
4. Press Back to return to the
previous menu.

Advertisement

Table of Contents
loading

Table of Contents