Chevrolet Volt 2013 Owner's Manual page 62

3-8 Seats and Restraints
1. Safety Belt Guide
2. Safety Belt Storage Clip
1. Remove the safety belt from the
safety belt guide (1) and place it
in the storage clip (2).
The safety belt should remain in
the storage clip while the
seatback is in the folded
position.
2. Pull the seatback release lever
to unlock the seatback.
A tab near the lever raises when
the seatback is unlocked.
3. Fold the seatback forward.
Raising the Seatback
Notice: Damage to the safety belt
or seatback locking mechanism
can occur if the safety belt is
caught between the rear seatback
and the seatback locking
mechanism. The safety belt must
be out of the way when the rear
seat is raised to the upright,
locked position. If the safety belt
is damaged, see your dealer and
have it replaced.
To raise the seatback:
1. Seatback Locking Mechanism
2. Safety Belt Storage Clip
1. Make sure the safety belt is in
the storage clip (2) before raising
the seatback.
The safety belt should not cross
the seatback locking
mechanism (1) when raising the
seatback.
2. Raise the seatback and push it
rearward to lock it into place.
A tab near the seatback release
lever retracts when the seatback
is locked.
3. Push and pull the top of the
seatback to be sure it is locked
into position.
4. Return the safety belt to the
safety belt guide after raising the
seatback.
Keep the seat in the upright, locked
position when not in use.