Fujitsu Sparc Enterprise T2000 Installation Manual page 84

I
initializing the system, 45
installation instructions, optional components,
reference, 2
installing optional components, 2
IP address, 3
L
LEDs, ports, and slots illustrated, 5, 25
left and right sides defined, 11
levers, locking, See "slide rail assembly locks"
list of optional components online, 2
locations of ports, slots, and LEDs, 25
locations of ports, slots, and LEDs (illustration), 5
locator LED button location illustrated, 25
locks, See "slide rail assembly locks"
logging into system controller
using network management port, 38, 43
using serial management port, 38
M
map of OpenBoot PROM devices, 46
minimum cable connections, 6
mode, AC standby, 29
modem not for use with the sc serial management port, 28
mounting screws for rack, 16
N
NET0-NET3 ports illustrated, 25, 26
netmask, 3
network management port
configuring and enabling, 37
not operational until configured, 4, 37
RJ-45 connector, 28
null modem cable adapters, 30
null modem cable for TTY serial port, 30
O
online list of optional components, 2
OpenBoot PROM device map, 46
optional components listed online, 2
optional components, installation instructions in service
manual, 2
58
SPARC Enterprise T2000 Server Installation Guide • April 2007
P
parity for serial terminal, no, 35
password command, 38
passwords, ALOM CMT, 34
path names, 46
PCI-E, PCI-X slot locations illustrated, 25
ports illustrated, 25
ports, slots, and LEDs illustrated, 5, 25
power cycling the system, 48
power supply locations illustrated, 25
powering on the system for the first time, 33
poweroff command, 49
poweron command, 44, 49
R
reset
resetting the system controller with resetsc, 42
resetting the system with uadmin, 48
resetsc command, 42, 53
resetting
system controller, 53
right and left sides defined, 11
right side defined, 11
RJ-45 cable, 6
S
SC, See system controller
screws for rack mounting, 16
serial management port RJ-45 connector, 27
serial port (TTY) DB-9 connector, 29
serial terminal
required before powering on, 35
settings, 35
setsc command, 39
show-disks command, 47
showsc command, 39, 41
slide rail assembly locks illustrated
front slide rail locks, 12
middle section lever, 14
mounting bracket locating pin lock, 15
mounting bracket release button, 13
slide rail release button, 24
slide rail spacing tool, 17
slots, ports, and LEDs illustrated, 5, 25