To Install The Slide Rail Assemblies; Figure 2-1 Unlocking The Slide Rail Assembly - Fujitsu Sparc Enterprise T2000 Installation Manual

A slide rail assembly consists of two parts: a slide rail and a removeable mounting
bracket. The slide rail attaches to the rack posts. The mounting bracket attaches to
the SPARC Enterprise T2000 server chassis.

To Install the Slide Rail Assemblies

▼
1. Pull both mounting brackets completely out of their respective slide rails:
a. Simultaneously press and hold the upper and lower lock buttons of the slide
rail lock (
FIGURE 2-1
b. Pull the mounting bracket out until it locks in the extended position.
c. Slide the mounting bracket release button in the direction shown in
then slide the mounting bracket out of the slide rail.
12 SPARC Enterprise T2000 Server Installation Guide • April 2007
).
FIGURE 2-1
Unlocking the Slide Rail Assembly
,
FIGURE 2-2