Auto Power Off - Samsung DVD-V70 Instruction Manual

VCR
ShowView Extend
GB
Language : English
Install
User Set

Auto Power Off

: Off
Screen Messages : On
User Set
Colour System : Auto
Off
NICAM : On
10
20
IPC : On
30
ShowView Extend : Off
40
50
60
VCR
Auto Power Off
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Language : English
Install
User Set
Off
Auto Power Off : Off
1Hour
Screen Messages : On
2Hour
3Hour
28
(DVD -V80 /DVD -V85 Only)
To prevent delays or over-runs the VCR has a function called
ShowView EXTEND allowing you to extend the recording time by
up to 60 minutes.
Only use if PDC is not available or set to Off.
1 After pressing the MENU, press the OK or ❿ .
2 Press the corresponding , buttons to select the
❷
option.
3 Press the OK or ❿ buttons to select this option.
Result: The User Set menu is displayed.
4
Press the corresponding or buttons, until the
❷
ShowView Extend option is selected.
5 Press the OK or ❿ buttons to set the
ShowView Extend
by increments of 10 minutes.
6 To turn off, press OK or ❿ buttons repeatedly until
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding or buttons, until the
❷
option is selected.
Off
3 Press the OK or ❿ buttons, until you select the time of Auto Power
Off interval.
Off 1Hour 2Hour
4
On completion, press RETURN twice to exit the menu.
Screen Messages
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the SEARCH, Programming MENU and
Timer functions, which cannot be hidden).
After pressing the MENU, press the OK or ❿ .
1
User Set
Result: The Setup menu is displayed.
2 Press the corresponding
Messages
3
To...
Display on-screen information
time
Hide on-screen information
Off shows.
4 On completion, press RETURN twice to exit the menu.
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
After pressing the MENU press the corresponding
to select the
2 Press the OK or ❿ buttons to select this option.
Result: The
Auto Power
3 Press the corresponding
option is selected.
Select
4 Press the OK or ❿ buttons as many times as required, until the
3Hour
correct cassette length is displayed.
5
Press RETURN twice to exit the menu.
or buttons, until the
Screen
❷
option is selected.
Press OK or ❿, until...
On is displayed.
is displayed.
Off
, buttons
❷
VCR option.
VCR Setup menu is displayed.
or buttons, until the Tape
❷
E180 E240
E 300 E260
VCR
GB
Language : English
Install
User Set
Auto Power Off : Off
On
Screen Messages : On
Off
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
VCR Setup
E180
Tape Select : E180
E240
Repeat Play : Off E260
E300
S-VHS : Off
29