Presetting the Stations Manually
You do not need to preset the stations manually if
you have already set them automatically.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
Install option.
❿
3
Press the OK or
to select this option.
Result: The Install menu is displayed.
Auto Setup
Manual Setup
4
Press the corresponding
Manual Setup option is selected.
❿
5
Press the OK or
to select a Manual Setup option.
Result: The TV STATION TABLE menu is displayed.
TV STATION TABLE
PR
CH
NAME
1
2
3
4
5
DELETE : CLEAR
6
or
Press the
buttons to select a programme
❷
number as required.
❿
7
Press the
button to preset the station.
Result: The MANUAL TUNING menu is displayed.
MANUAL TUNING
PR
:
CH
: - - -
MFT
: -
NAME
: - - - -
❿
.
,
buttons to select the
❷
Install
38
or
buttons, until the
❷
SWAPPING : OK
RETURN
MEMORY : OK
RETURN
➛ or ❿
8
Press the
Result: The frequency band is scanned and the first
station found is displayed.
9
or
Press the
The station name is set automatically from the
broadcast signal.
10
To change the programme's name, press the
button.
Result: The first letter of the name flashes.
11
To...
Select a character Press the
Move to the next or Press the
previous character respectively.
12
If you...
Wish to store the
station displayed
Do not wish to
store the station
displayed
13
Repeat this procedure from Step 6 onwards, until
all the required stations have been stored.
14
On completion, press the RETURN button three
times to exit the menu.
ENG-12
buttons to start scanning channel.
buttons until the NAME is selected.
❷
Then...
or
button until
❷
the required character is
displayed (letters, numbers or "-"
character).
➛ or ❿
buttons
Then...
or
Press the
❷
until the MFT is selected.
➛ or ❿
Press the
buttons to
adjust the picture, if necessary.
Press OK to store the station
or
Press the
❷
until the CH is selected.
➛ or ❿
Press the
buttons to
go on scanning the
frequency band and display
the next station
Go back to the beginning of
Step 9
❿
buttons
buttons