Playing A Sequence Frame By Frame; Playing A Sequence At Variable Speeds - Samsung DVD-V70 Instruction Manual

VCR

Playing a Sequence Frame by Frame

GB
1
VCR

Playing a Sequence at Variable Speeds

1
1
40
You can:
Stop the cassette at a given frame (image)
Advance one frame at a time
No sound is heard when playing back frame by frame.
1 Press:
❿
ll to start playing the cassette
❿
ll button one more time to make still mode.
F.ADV/STEP ( ) to advance frame by frame
❿
2
To return to normal playback, press ll.
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the TRK
) buttons to minimize this effect.
( ,
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example: You wish to analyze a sportsperson's technique,
movement by movement.
The Shuttle function is available on the Remote control
No sound is heard when playing a sequence at variable
speeds.
1 Press:
❿
ll during playback
SHUTTLE (<<) to play the cassette backwards
SHUTTLE (>>) to play the cassette forwards
2 Each time you press a SHUTTLE button, the speed is changed as
shown in the following illustration.
REVERSE REVERSE REVERSE SLOW SLOW
PLAY PLAY PLAY RPLAY STILL MOTION MOTION PLAY 2PLAY
X9 X5 X3 X1/10 X1/5
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an "index" is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a specific
index and start playback from that point. Depending on the direction
selected, the indexes are numbered as follows:
etc.
This DVD-VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other VCRs
using the same system and vice versa.
Go to 0:00:00 Stop
Use this feature when you want to search for the 0:00:00 counter position on
a cassette. Press the CLEAR button at the point on the tape where you want to
set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
1
After pressing the SEARCH, press the corresponding
buttons, until the
2 Press the OK or ❿.
End Search
Use this feature when you want to search for a blank position to record a
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1
After pressing the SEARCH, press the corresponding
buttons, until the
2 Press the OK or ❿.
PLAY PLAY PLAY
X3 X5 X9
Prev Seq. being Next
Seq. played Seq. etc.
2 1 1 2
or
❷
Go To (0:00:00) option is selected.
or
❷
End Search option is selected.
VCR
GB
OK
41