Samsung DVD-V5500 Instruction Manual
Hide thumbs
Also See for DVD-V5500:
- Instruction manual (87 pages) ,
- User manual (68 pages) ,
- Manual del instrucción (26 pages)
Related Manuals for Samsung DVD-V5500
Summary of Contents for Samsung DVD-V5500
-
Page 1: Table Of Contents
NTSC DVD-VCR Instruction Manual DVD-V5500 Warning Disc Type and Characteristics Description Getting Connected Basic Operation Basic Recording Troubleshooting... -
Page 2: Warning
Warning The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. DO NOT OPEN THE DVD-VCR. Refer to service personnel. 40¡C 5¡C Do NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%). -
Page 3: Disc Type And Characteristics
Disc Type and Characteristics Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corre- sponding logos: Disc Types (Logos) Recording Types Disc Size Max. Playing Time Single-sided 240 min. 12 Cm Double-sided 480 min. -
Page 4: Description
Description Front Panel 8 9 10 11 DVD DECK 10. RECORD BUTTON OPEN/CLOSE BUTTON 11. EZ VIEW BUTTON VIDEO CASSETE COMPARTMENT 12. FRONT PANEL DISPLAY EJECT BUTTON 13. PROGRAMME SELECTION BUTTON STANDBY/ON BUTTON 14. DVD/VCR SELECTION BUTTON REWIND/SKIP BACK BUTTON 15. -
Page 5: Getting Connected
Getting Connected 1. Connecting DVD-VCR to the TV using the RF 2. Connecting DVD-VCR to the TV using the SCART Cable Cable You can connect your DVD-VCR to the television using the SCART cable if the appropri- 1. Remove the aerial or network input cable from ate input is available on the television. - Page 6 Getting Connected There are several ways to connect your DVD- 2. Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD-VCR and VCR. Select one of the following video/audio con- AUDIO IN jacks on TV(or AV amplifier). necting that best suits you below.
-
Page 7: Basic Operation
Basic Operation (DVD) Playback Features During DVD/CD playback you can select from the following special playback options. To resume normal playback, press the √ll button. Still - Turn on your DVD-VCR and set it to the correct Video Input on your TV's remote control. - If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. -
Page 8: Adjusting Picture Alignment Manually
Basic Operation (VCR) Playing a Cassette 1. Switch on both the television and your DVD-VCR. 2. Insert the video cassette. If the safety tab on the cassette is intact, press the √ll (play/pause) button. Otherwise, the cassette is played automatically. •... -
Page 9: Basic Recording
Basic Recording Recording a Programme Immediately Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video source). 1 Switch on the television. 1. Switch on the television. 2. Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. -
Page 10: Troubleshooting
Troubleshooting Identifying DVD Problems Disc does not play. • Ensure that the disc is installed with the label side facing up. • Check the region number of the DVD. • This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, or a CD. •... -
Page 11: Identifying Vcr Problems
Troubleshooting Identifying VCR Problems • Check that the power plug is connected to a wall outlet. No power • Have you pressed the STANDBY/ON button? You cannot insert a video cassette •A video cassette can only be inserted with the window side up and the safety tab facing you. •...