Selecting The Colour Mode; Nicam - Samsung DVD-V70 Instruction Manual

VCR

Selecting the Colour Mode

GB
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
User Set
Auto
Colour System : Auto
PAL

NICAM

: On
SECAM
IPC : On MESECAM
ShowView Extend : Off B/W
VCR
NICAM
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
User Set
Colour System : Auto
On
NICAM : On
Off
IPC : On
ShowView Extend : Off
26
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding , buttons to select the
❷
User Set option.
3 Press the OK or ❿ to select this option.
Result: The menu is displayed.
User Set
4
Press the corresponding or buttons, until the
❷
System option is selected.
5 Press the Ok or ❿ button to select
Auto PAL
MESECAM B/W .
Auto When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6
On completion, press RETURN three time to exit the menu.
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 39.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding , buttons to select the
❷
User Set option.
3 Press the OK or ❿ to select this option.
Result: The User Set menu is displayed.
4 Press the corresponding or buttons, until the
❷
s selected.
5 Press OK or ❿, until...
To...
Mono mode Off is displayed.
Off: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode On is displayed.
On: Normally set at this position.
6 On completion, press RETURN three times to exit the menu.
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the MENU button on the remote control.
Result: The Setup menu is displayed.
2 Press the OK or ❿ .
Result: The Setup menu is displayed.
3 Press the corresponding
User Set option.
4 Press the OK or ❿ buttons to select this option.
Result: The
5
Press the corresponding
selected.
6 Press the Ok or ❿ buttons to select the IPC (intelligent picture
control) option.
When intelligent picture control mode is
of the image is adjusted automatically.
7
To adjust the sharpness manually, press the
Colour
IPC mode Off
8 Press the ➛ or ❿ buttons until the picture is displayed according to
SECAM
your preferences.
If you do not press a button within ten seconds, the
PICTURE
9
On completion, press the RETURN button again.
Intelligent Picture Control ( Remote Control )
1
During playback, press the IPC button.
Result: The
2 Press the button to turn the IPC (Intelligent Picture Control)
❷
option On and
When Intelligent Picture Control mode is
of the image is adjusted automatically.
3
To adjust the sharpness manually, select Intelligent Picture Control
mode .
Off
The horizontal picture adjusting appears.
NICAM option
4 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE
5
On completion, press the IPC button again.
, buttons to select the
❷
User Set menu is displayed.
or buttons, until the IPC option is
❷
, the sharpness
On
button to turn the
❷
.
menu disappears automatically.
PICTURE menu is displayed.
Off .
On , the sharpness
menu disappears automatically.
VCR
GB
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
User Set
Colour System : Auto
NICAM : On
On
IPC : On
Off
ShowView Extend : Off
VCR
OK
5
27