Non-Movement Alarm - Ericsson DT400 User Manual

f O
f O
f O
BusinessPhone – Cordless DT400/DT410/DT420/DT430

Non-movement alarm

Note: This feature is only available for the DT430. The
DT420 can be fitted with an optional Non-movement alarm.
If you have not moved within 30 seconds and are unable to raise an
alarm yourself, a sensor inside the phone will alert the operator.
To use this feature, you have to activate the Non-movement alarm
feature first. You can do this via the display menu or by programming
the function as a Hot key, see
Activate Non-movement alarm
O
Press to enter the menu
Select "4 Settings" and press
Select "8 Non-movement" and press
The display shows:
Off
Note: If the Non-movement alarm is already turned on, the
display will show "On" instead of "Off". If you want to keep
the alarm on, just press C to exit the menu without changes.
Select "On" and press
The Non-movement alarm is set.
C
Press to exit the menu
The display shows a small "A" in the last row. This indicates that the
Non-movement alarm is set:
System A
Note: It is recommended to program two Hot keys to
activate and deactivate the Non-movement alarm. How to
program a Hot key, see section
"Edit a Hot
A
Other Useful Facilities
key" on page 46.
"Edit a Hot key" on page 46.
59