Maintenance And Care; Machine Care - Bissell ProHeat 25A3 Series User Manual

M
aintenance and care

Machine care

For best results, a few simple steps can
assure your machine is well maintained
after cleaning is complete.
1. Flush your machine of any remaining
residual solution.
a. Fill the 2-in-1 clean water tank
(bladder) with clean hot tap water.
b. Plug your machine into a proper
outlet and set the ReadyTools dial to the
"FLOOR CLEANING" setting. Turn the
power on by pressing the power button.
c. Recline the handle and press the spray
trigger for 15 seconds while making
forward and backward passes on carpet.
Release the trigger to suction. Repeat for
another 15 seconds. Continue without
pressing the trigger until there is no more
water being suctioned.
2. Turn power switch off. Unplug the
machine and wrap the power cord.
3. After emptying the 2-in-1 water tank, rinse
with running hot tap water, taking care to
clean underneath and around the heavy
duty bladder. Clean out red lint screen
(located on tank lid). Removable nozzle
may be rinsed if necessary.
4. Before you place the 2-in-1 water tank
back onto the machine, remove the red
solution filter cap (on the base of the
machine). Remove the cap by inserting
a coin or a flat head screwdriver into
the slot on the top. Turn counter
clockwise to unscrew.
5a. Remove the white filter by grasping
the post and pulling up and out of the
unit. Rinse the filter under cold water.
NOTE: Be careful not to drop the
filter into the sink or disposal.
14
w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of fire, electric
shock or injury, unplug from the
outlet before servicing.
Lint Screen
4.
5a.
8 0 0 . 2 3 7 . 7 6 9 1