Bissell ProHeat 25A3 Series User Manual page 11

O
perations
Empty the 2-in-1 water tank/
clean removable nozzle cont
4. If nozzle needs to be cleaned: remove by
grasping handle at the top and pulling
forward. Clean removable nozzle by rinsing
under running water.
5. When finished, replace nozzle by slightly
raising front of machine to line up slots on
the base with the hooks on nozzle. Attach at
base first and then click nozzle into place.
NOTE: If nozzle is not attached
properly loss of suction will occur.
6. To continue carpet cleaning, refer back to
pages 9 and 10, beginning with "Fill the
2-in-1 water tank" on page 9.
If cleaning is complete, refer to the
"Maintenance and care" section on
page 15.
ReadyTools
Your PROheat deep cleaner comes equipped with
a hose and at least one attachment for cleaning
stairs, upholstery, and more.
Important! If using the machine to clean
upholstery, check upholstery tags.
1. Check manufacturer's tag before cleaning.
"W" or "WS" on the tag means you can use
your PROheat. If the tag is coded with "X"
or "S" (with a diagonal strike through), or
says "Dry Clean Only," do not proceed. Do
not use on velvet or silk. If manufacturer's
tag is missing or not coded, check with your
furniture dealer.
2. Check for colorfastness in an
inconspicuous place.
3. If possible, check upholstery stuffing. Colored
stuffing may bleed through fabric when wet.
4. Plan activities to give upholstery time to dry.
5. Vacuum thoroughly to pick up loose debris
and pet hair. Use a vacuum with a brush
attachment and a crevice tool to clean fabric
folds and tufts.
6. To begin cleaning with attachments, follow
the instructions on page 9 for filling the 2-in-1
water tank.
w w w . b i s s e l l . c o m
™
4.
5.
Manufacturer's tag
8 0 0 . 2 3 7 . 7 6 9 1
11