Machine Storage - Bissell ProHeat 25A3 Series User Manual

M
aintenance and care
5b. Replace the white filter back into the
filter area. NOTE: Make sure the
white filter is seated properly
before replacing the red solution
filter cap.
5c. Replace the red solution filter cap
and turn clockwise to tighten.
6. Replace the 2-in-1 water tank on
the machine.
7. Any loose hair or debris can be pulled
from the brush roll and thrown away.
8. To clean attachments, remove from
hose and rinse in clean, running water.
Dry before storing. Clean the hose by
suctioning clean water from the tap.
Before wrapping back on machine, lift
end of hose and stretch out to ensure
all water is cleared from hose. Refer to
page 13.
9. Wipe the machine's exterior with a soft cloth.
10. After carpet is dry, vacuum again to
remove hair and fuzz.

Machine storage

Store deep cleaner in a protected, dry area
(closet or basement). Since this product uses
water, it must not be stored where there is
danger of freezing. Freezing will damage
internal components and void the warranty.
w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of fire, electric
shock or injury, unplug from the
outlet before servicing.
8 0 0 . 2 3 7 . 7 6 9 1
15