Hard Floor Cleaning - Bissell ProHeat 25A3 Series User Manual

O
perations

Hard Floor Cleaning

Select Models Only
Your deep cleaner may have included a hard
floor tool and Hard Floor Solutions Formula.
The hard floor tool provides effective cleaning
for linoleum, vinyl, and tile floors.
Caution: Do not use on unsealed
hardwood floors.
1. Thoroughly vacuum or sweep floor to
pick up any debris.
NOTE: Prior to filling with formu-
la and water be sure all carpet
cleaning formula is thoroughly
rinsed from tank.
2. Fill BISSELL 2X Hard Floor Solutions
Formula to the indicated fill line in the
built in measuring cup and pour into
mouth of bladder.
3. Fill the bladder with clean hot tap water
and set aside.
4. Attach the hard floor tool to the bottom
of the machine by hooking it into the
nozzle and swinging it down until it
clicks into place.
5. Be sure the ReadyTools dial is set to
"FLOOR CLEANING".
6. Plug into an outlet and turn the power on.
7. Plan your cleaning route to leave an exit
path. Be sure to allow adequate time for
floors to dry.
8. While pressing the spray trigger, make
one slow forward wet pass and another
back. Caution: Do Not Overwet.
9. Repeat the motion without pressing
the trigger using the hard floor tool
to squeegee and suction up the
dirty water.
10. When finished, remove hard floor tool,
rinse and let dry before storing. Refer to
the Maintenance section on page 15 for
machine clean up and storage instructions.
w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of fire and
electric shock- when cleaning a
hard floor, the BISSELL bare floor
tool kit 203-5641 must be used
and it must only be used with
BISSELL Hard Floor Solutions or
BISSELL 2X Hard Floor Solutions
cleaning fluid intended for use
with this appliance.
4.
8 0 0 . 2 3 7 . 7 6 9 1
13