Assembly - Bissell ProHeat 25A3 Series User Manual

A
ssembly
Your PROheat comes in four, easy to
assemble components:
Handle Assembly
Upper Hose Rack
Lower Body
Lower Hose Rack
The only tool you will need to
assemble your cleaner is a Phillips
head screwdriver.
1. Slide handle assembly onto lower body
and secure with two long screws.
2. Attach upper hose rack to back of
handle assembly by pushing into
open slots and sliding down until it
snaps into place.
3. Attach lower hose rack by sliding
in place on lower body assembly
and securing with 2 short screws.
4. Attach Tough Stain tool to end of hose.
5. Wrap flex hose around hose rack
and secure it into notched out holder
as shown.
6. Keep flex hose locked in place with
hose secure latch.
Tip:
regularly can reduce dust and
allergens in your home.
6
w w w . b i s s e l l . c o m
Deep cleaning carpeting
WARNING:
Do not plug in your cleaner
until you have completely
assembled it per the
instructions and are familiar
with all instructions and
operating procedures.
1.
2.
3.
4.
5.
Hose
Secure
Latch
6.
8 0 0 . 2 3 7 . 7 6 9 1