Using the Mute Feature
The Mute feature disables your microphone to prevent parties from hearing you.
To enable or disable the Mute feature: While on the call, press
/
MUTE
UNMUTE
Displaying Your User Information
You can temporarily display your user information and the system time and date.
To display user and system information: Press
Displaying Caller ID Information
Use Caller ID to display the caller's name or number (if available) and the elapsed
time of the call, toggling between the name and number.
To display caller ID information: Press
Blocking Outbound Caller ID Information
You can block your Caller ID information from displaying on the current call.
To block outbound Caller ID for the current call: Press
the number (the number is immediately dialed).
To unblock outbound Caller ID (if set to always blocked): Press
Using Annoyance Call Trace
Annoyance Call Trace identifies and records an unwelcome caller's Caller ID infor-
mation and the time of the call.
information. Annoyance Call Trace can be used during or immediately after the call.
To use Annoyance Call Trace: Press
*
"All call" outbound Caller ID settings are enabled/disabled by the system administrator.
†
Annoyance Call Trace may or may not be enabled for your system. Contact your system administrator
for more information.
®
Inter-Tel
Model 8662 Endpoint User Guide
menu button.
JOHN SMITH
:08
Caller Name on
†
You must contact your system administrator for the
CALL TRACE
SUCCEEDED
.
6
5
480-961-9000
:08
Caller Name off
(Caller ID toggle).
3
4
6
. A confirmation notice appears.
5
7
or the
MUTE
*
, and then enter
7
.
8
2
21