Table of Contents
Advertisement
2.0 Installation
This section explains:
•
UPS installation
•
UPS rear panels
Installing the UPS
The following steps explain how to install the UPS. Figure 2 shows a typical installation only. See "UPS
Rear Panels" on Page 7 for the rear panel of each model.
NOTE
Do not make unauthorised changes to the UPS, otherwise damage may occur to your
equipment and void your warranty
1.
If installing an optional EBM, continue to Step 2; otherwise skip to Step 4
2.
Plug the EBM cable into the battery connector on the UPS rear panel (See Figure 2).
3.
If a second EBM is to be installed, plug the EBM cable of the second cabinet into the battery
connector on the first EBM. Up to four EBMs may be connected to the UPS.
Figure 2. Typical Installation with Two EBMs
5
Advertisement
Table of Contents
