INSTALLATIONS
JP1: Clear CMOS Contents
Use JP1, a 3-pin header, to clear the CMOS contents. Note that the
ATX-power connector should be disconnected from the CPU card before
clearing CMOS.
JP1
JP2, JP3, JP4: RS232/422/485 (COM2) Selection
J4, COM1 is fixed for RS-232 use only.
J5, COM2 is selectable for RS232, RS-422 and RS-485.
The following table describes the jumper settings for COM2 selection.
Function
(pin closed)
JP6: 82551 10/100Mb LAN Enable/Disable
12
Setting
Pin 1-2
Short/Closed
Pin 2-3
Short/Closed
COM2
RS-232
JP2:
1-2
Jumper
Setting
JP3:
3-5 & 4-6
JP4:
3-5 & 4-6
JP6
IB850 User's Manual
Function
Normal
Clear CMOS
RS-422
JP2:
3-4
JP3:
1-3 & 2-4
JP4:
1-3 & 2-4
Function
Enable LAN
Disable LAN
RS-485
JP2:
5-6
JP3:
1-3 & 2-4
JP4:
1-3 & 2-4