Processor - Intel D865PCD Technical Product Specification

1.4 Processor

✏
NOTE
Refer to Thermal Considerations (Section 2.12, page 61) for important information when using an
Intel Pentium 4 processor operating above 2.80 GHz with this Intel
The board is designed to support the following:
•
Intel Pentium 4 processors in an mPGA478 processor socket with a 400 or 533 MHz system
bus
•
Intel Celeron processors in an mPGA478 processor socket with a 400 MHz system bus
See the Intel web site listed below for the most up-to-date list of supported processors.
For information about...
Supported processors for the D865PCD board
CAUTION
Use only the processors listed on web site above. Use of unsupported processors can damage the
board, the processor, and the power supply.
#
INTEGRATOR'S NOTES
•
Use only ATX12V-, SFX12V-, or TFX12V-compliant power supplies. ATX12V, SFX12V, and
TFX12V power supplies have an additional power lead that provides required supplemental
power for the processor. Always connect the 20-pin and 4-pin leads of ATX12V, SFX12V, and
TFX12V power supplies to the corresponding connectors on the desktop board, otherwise the
board will not boot.
•
Do not use a standard ATX power supply. The board will not boot with a standard ATX power
supply.
•
Refer to Table 3 on page 20 for a list of supported system bus frequency and memory speed
combinations.
For information about
Power supply connectors
®
desktop board.
Refer to:
http://www.intel.com/design/motherbd/cd/cd_proc.htm
Refer to
Section 2.8.2.2, page 46
Product Description
19