Information - Denon AVR-1609 Owner's Manual

Information
• .
'~¥iV.bOJ$c,tJ~d.iQ,iQ~i!;<lt,:lilm91l~IJ'1tbi$:1Jl"'lU!.
L
Button located on both ttie main unit and the remote control
unit ..
BUTTON
Button only on the main unit
lo
<BUTTON>
Button only on the remote control unit ..
[BUTTON]
<STATUS>
Information on the main unit's various settings (Stat.us) and on input
signals (Audio Input Signal) is shown on the display.
The information displayed changes each time you press
<STATUS>.
Tile information is displayed for several seconds before the display
returns to its original condition.
[Items to be checked]
• Surround Mode
• Input signal
• Dialogue normalization
• Input function
• Input digital terminal
• Audio Delay
• Tone Control
• Channel level of each speaker
·CII'JEMA EO
• Night Mode
etc.
' . ..d:;,!S"
v" cDialogu~11~lT1lalizati()Qsfun~tion
·.·.::S:(
This is automatically activated when playing Dolby Digital sources.
This function automatically corrects the standard signal level for
individual program sources.
The correction value can be checked using
<STATUS>.
OFFSET -4dE:
The figure is the correction value when the standard level is
corrected.
~~
m:i
• The items displayed will differ depending upon the current settings,
the presence or absence of an input signal or the type of input signal,
etc.
• For details of the content of the items displayed, refer to the page
containing an explanation of the settings.
ENGLISH
•
36