Denon AVR-1609 Owner's Manual page 62

ENGLISH
(Remote Control Unit)
(Audio)
I
Set does not work
properly when
remote control
unit operated.
59
o Batteries are worn.
o You are operating outside of the
specified range.
o Obstacle between main unit and
remote control unit.
o The batteries are not inserted in
the proper direction, as indicated
by the polarity marks in the
battery compartment.
o The set's remote control sensor
is exposed to strong light (direct
sunlight, inverter type fluorescent
bulb light, etc.).
o The remote ID of the main unit
and remote control unit do not
match.
o The
SOURCE CONTROL
switches
are not set in the correct
positions.
o Replace with new batteries.
o Operate within the specified
range.
o Remove the obstacle.
olnsert the batteries in the
proper direction, following the
polarity marks in the battery
compartment.
o Move the set to a place in which
the remote control sensor will
not be exposed to strong light.
o Set "Remote ID" for the main
unit to "I':
o Set the
SOURCE CONTROL
switches to the correct positions
according the operation you are
applying.
3
3
3
3
3
28
38,40,41,
45 - 47. 50
FiiJ!iJS~ntA~
&.£"
.·"NAl'"
,\»
!i.·
b"
tbAOi>A
No sound is
o You are playing a monaural o The mode is set to something 29
produced from
source
nv.
AM radio broadcast, other than "STANDARD" (Dolby/
center speaker. etc.) in the "STANDARD" (Dolby/ DTS Surround).
DTS Surround) mode.
No sound
o The surround mode is set to o Set to a surround playback 30
is produced
"STEREO" or "DIRECT': mode.
from surround
speakers.
No sound is
o The surround back speaker's o Check the setting and change it 27
produced from
power amplifier is assigned to a as necessary,
surround back different channel.
speaker.
o Surround back speaker setting is o Set to something other than 22
set to "None': "None':
o The "Parameter"
-
"Surround o Please set "Parameter"
-
33
Parameter"
-
"SB CH
our
"Surround Parameter"
-
"SB
settings are "OFF': CH
our
to settings other than
"OFF':
o Surround mode not set to a mode o Select a surround playback
29,30
for 6.1- or 71-ehannel playback, mode.
No sound is o Subwoofer's power not turned o Turn on the subwoofer's power.
-
produced from on.
subwoofer. oThe "Subwoofer" setting at o Set to "Yes': 22
"Speaker Setup" is set to "No':
o The subwoofer is not properly o Check the connections.
9
connected.
o The
subwoofer's
volume is o Adjust the subwoofer's volume 43
turned off. to an appropriate level.
No test tones are o Surround mode not set
to o Set to the "STANDARD"(Dolby/
29
produced when "STANDARD" (Dolby/DTS DTS Surround) mode.
remote control
Surround).
unit's
TEST
button
is pressed.
DTS sound is not
o DVD player's audio output setting o Set the DVD player. For details,
-
output. is not set to bitstream.
refer
to
the DVD player'S
operating instructions.
o DVD player is not compatible o Use a DTS-eompatible player. -
with DTS sound playback.
o The AVR-1609's "Input Mode" o Set to the "Auto" or "DTS" 37
setting is set to other than mode,
"DTS':