Selecting The Appropriate Setting For Your Connections; Hardware Setup; Speaker Impedance Sub-Menu - Integra DTR-7.4 Instruction Manual

Selecting the Appropriate Setting for Your Connections

Display Dimmer
Memory
Direct / Pure Audio Stereo Surround THX DSP
Zone 2 ( )
GRN
Rec ( RED ) DVD Video 1 Video 2 Video 3 Video 4 Video 5 Tape Tuner
VCR 1 VCR 2
Setup/Enter/Return/
Cursor

Hardware Setup

In this section, you will perform the initial settings for
the following scenarios.
• When the impedances for speakers connected to the
DTR-7.4 are between 4 and 6 Ω (See page 18).
• When connecting speakers to the ZONE 2
SPEAKERS terminals (See page 66).
• When operating the remote controller using the IR IN
terminal (See page 69).
• When you want to fix the TV Format setting to PAL or
NTSC (Australian model only).
Note:
The settings within the Hardware Setup Menu will need
to be made before you use your DTR-7.4 for the first
time. Once you have selected one of the Hardware Setup
menu items, the setting will not be displayed again when
you enter the Basic Menu. To change the setting at a later
date, select the Advanced Menu to display the Hardware
Setup Menu.
Advanced Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
4.Preference
5.Network Setup
→Basic Menu
[ENTER]Quit:[SETUP]
30
Rec Out Zone 2 Of f
Master Volume
Setup
Tuning
Enter
Return
Preset
FM Mode
A-FO RM Listening Mode Memory On
Clear
Video 5 Input
Phono CD Net Audio
1
@. - ' /
Digital S Video Video L Audio R
4
DTR-7.4 GHI
7
PQRS
+10
--/---
Custom
Macro
Mode
Dimmer
T V
Input
+
CH
Disc
-
/ / /
Di l
0.Hardware Setup
1.Speaker Impedance
2.Surr Back/Zone2
3.Remote Setup
4.TV Format
[ENTER]Quit:[SETUP]
If you want to perform these operations using the remote
controller, first press the scroll wheel.
1
Display the main menu.
Press the Setup button on the front panel, or press
Standby
T V
Input
the scroll wheel and then press the Setup button
+
2 3
ABC DEF TV CH
5 6 -
on the remote controller to display the main menu
JKL MNO
8 9
TUV WXYZ
TV VOL
0 Clear on the monitor and front display.
Direct Tuning
Zone 2
2
Use the
Input
Sleep
"0. Hardware Setup" and then press the
Enter VOL
Enter button.
The "Hardware Setup" menu appears.
M ti
3
Use the
an item and then press the Enter button.
4
Use the
an item and then use the
buttons to set the desired value.
5
Press the Setup button to exit the Setup
menu.
Press the Return button to return to the previous
menu.

Speaker Impedance Sub-menu

Use this sub-menu to set the impedance level of the
DTR-7.4 to match the specifications of the speakers you
are using.
a. Minimum
6 ohms (default): Select when the impedances of all
speakers are between 6 and 16 Ω.
4 ohms: Select when the impedance of even one
speaker is between 4 and 6 Ω.
Note:
Before you change this setting, be sure to first lower the
volume at the DTR-7.4 to the minimum level.
and cursor buttons to select
and cursor buttons to select
and cursor buttons to select
and
0-1.Speaker Impedance
a.Minimum :6 ohms
Quit:[SETUP]
cursor