Table of Contents
Advertisement
4.Basic Operation
4.6
Memory Mode
This mode allows recalling and operating the preprogrammed frequency or setting in
the memory channels. This unit provides up to 200 memory channels, 2 CALL
channel (VHF/UHF), 2 Repeater-Access function memory (VHF/UHF), 10 Transmitter
Detecting Function memory and 2 Program scan edge memory (VHF/UHF).
4.6.1 How to Program Memory Channel(s)
1. Select a frequency and operating parameters to be programmed in the VFO mode.
Programmable parameters are explained later. Press the
on the display.
2. Press the FUNC key to display
4
3. Rotate the dial to select the desired memory channel number while
empty channel is shown with a flashing "
4. By pressing the
programming is completed.
5. Pressing the FUNC then
channel will delete the memory data and it becomes available for reprogramming.
4.6.2 Recalling a Memory Channel
1. Select the Memory mode by pressing the
appear on the display to indicate that the unit is in the Memory mode.
Repeat to switch between the Memory and VFO modes.
2. Select a memory channel.
Rotating the dial will increase or decrease a memory channel number.
4.6.3 Deleting a Memory Channel
1. Select the Memory mode by pressing the
2. Rotate the dial to select the memory channel No. that you wish to delete.
3. Press the FUNC key, and while
beep sounds, then "
NOTE:
• Over writing new data is always permitted. It's not necessary to delete the old
data before overwriting.
• When "
is on the display), it is still possible to cancel the operation by pressing the
FUNC key, and while
changing channels or modes, this is no longer possible.
28
.
key again while
key while
is displayed on the LCD, press the
" flashes on the display.
" is flashing in step 3 (when the memory contents are displayed as
is displayed on the LCD, press the
key. "
". "V-SET (U-SET)" is explained later.
is on the display, a beep sounds and
is displayed on the programmed
key. "
" and channel number
key.
" appears
is displayed. An
key. A
key. After
Advertisement
Table of Contents
