Capturing Another Image While Printing - Sony UP-25MD Instructions For Use Manual

If the paper runs out during printing
The printer stops the printing operation.
Load the paper into the paper tray and press the PRINT
button.
However, the printout quantity is reset to the original
quantity requested before printing was stopped.
For example, if the printout quantity is set to 5, and the
paper runs out when three copies are printed, the printout
quantity is reset to 5. If you want to print only the
remaining copies, set the printout quantity to 2 after
loading the paper. (See "Loading the Paper" on page 17.)
Capturing Another Image While
Printing
While the printer is printing, you can queue printing jobs
by capturing another image into another memory page to
be printed once the printer becomes free. The number of
usable memory pages depend on the type of printouts and
settings. (See "Memory page" on page 28.)
1
Select the desired memory page by pressing the
MEMORY PAGE button.
Pressing the MEMORY PAGE button switches the
memory page.
The available memory pages do not blink.
2
Press the CAPTURE button at the instant the image
you want to print appears on the screen.
1 2 3
3
Press the PRINT button.
The image captured in step 2 is queued. The image is
printed as soon as all previous printing jobs have been
completed.
Memory page whose image has been queued for
printing (blinks on the video monitor)
The memory page display stop blinking and lights up on
the video monitor once printing has been completed.
Note
Another image cannot be stored in a memory page in
which an image has already been queued for printing
(memory page indication blinks). In such a case, the
"PLEASE WAIT PRINTING MEMORY" message
also appears.
4
To queue another memory page, repeat steps 1, 2 and
3.
Making Full-Size Image Printouts
25