Sony UP-25MD Instructions For Use Manual page 35

6
Press the EXEC button.
The character selected in step 5 appears at the point
where the green cursor is positioned in the character
display area, after which the cursor moves to the next
position.
The cursor moves to this position.
When you enter the wrong character in the
above example
1 Select by pressing the M, m, < or , button,
then press the EXEC button.
The cursor moves back by one and the character
entered in step 5 is highlighted in green.
2 Select DEL by pressing the M, m, < or ,
button.
Highlight DEL in green by pressing the M, m,
Lit in green < or , button. DEL blinks in green.
ress the EXEC button.
3
P
The character selected in 1 is deleted.
When the character to be deleted is located among
previously entered characters, the characters after
the deleted one shift back by one.
7
Repeat steps 4, 5 and 6 to enter the remaining
characters of the caption.
To enter a space
1 Position the green cursor at the point where you
want to enter a space.
2 Select SP by pressing the M, m, < or , button.
3 Press the EXEC button.
A single space is entered and the green cursor
moves to the next position.
To replace a previously entered character
without changing the number of characters
You can replace a previously entered character with a
new one.
1 Position the green cursor at the character to be
replaced by performing the operations explained
in step 4.
2 Overwrite the invalid character with the correct
character by performing the operations explained
in steps 5 and 6.
The previously entered character is replaced with
the new one.
To add characters midway
1 Position the cursor at the position where a
character is to be added by performing the
operations explained in step 4.
2 Select INS by pressing the M, m, < or ,
button. Then press the EXEC button.
A single space is inserted between characters and
the cursor is positioned at the space.
3 Enter the character to be added.
When it is necessary to change the CAPTION
ON/OFF setting, go to step 8. If not, go to step 9.
Example: Add a character between A and B.
1 Move the cursor to B. (B is highlighted in green.)
2 Highlight INS. (INS blinks in green).
Then, press the EXEC button.
A single space is inserted between A and B and
the green cursor is positioned at the space.
Cursor (lit in green)
Making Printouts with a Caption
35