Sony UP-25MD Instructions For Use Manual page 39

Each time you press the DISPLAY button, the setting
changes in the following sequence: ON t OFF t
ON....
Highlight OFF in green.
To display characters on the video monitor
Select ON.
To set the monitor display from the menu
You can also set whether characters are displayed on the
video monitor by changing DISPLAY to ON or OFF in the
OUTPUT SETUP menu. The setting of the DISPLAY
button also changes according to the setting of DISPLAY
in the OUTPUT SETUP menu, and vice versa.
When you want to see an image that is hidden
below a menu
You can erase the menu temporarily while holding the
DISPLAY button down.
Note
The error messages are always displayed regardless of the
setting of the monitor display.
Erasing the Screen Display on the Video Monitor
39