Installer Final Check List; Gas Hook –Up - Charmglow 720-0578 Assembly & Operating Instructions

5. When connecting regulator assembly to the
valve, hand tighten the quick coupling nut
clockwise to a complete stop. Do not use a
wrench to tighten. Use of a wrench may
damage the quick coupling nut and result in
a hazardous condition.
6. Open the tank valve fully (counterclockwise).
Apply the soap solution with a clean brush
to all gas connections. See below. If
growing bubbles appear in the solution the
connections are not properly sealed. Check
each fitting and tighten or repair as
necessary.
Specified clearance maintained
24"(61cm) from combustibles.
All internal packaging removed.
Knobs turn freely.
Burners are tight and sitting properly on
orifices.
Pressure regulator connected and set.
Gas connections to grill using hose &
regulator assembly provided (pre-set for
11.0" water column).
Unit tested and free of leaks.
User informed of gas supply shut off
valve location
USER, PLEASE RETAIN THIS MANUAL
FOR FUTURE REFERENCE.
7. If you have a gas connection leak you
cannot repair, turn gas OFF at supply tank,
disconnect fuel line from your grill and call
1-800-913-8999 or your gas supplier for
repair assistance.
8. Also apply soapy solution to the tank
seams. See below. If growing bubbles
appear, shut tank OFF and do not use or
move it! Contact an LP gas supplier or
your fire department for assistance
To disconnect L.P. gas cylinder:
1. Turn the burner valves off.
2. Turn the tank valve off fully (turn
clockwise to stop).
3. Detach the regulator assembly from the
tank valve by turning the quick coupling
nut counterclockwise.

Installer Final Check List

PROPANE CYLINDER CAUTIONS
a) Do Not store a spare LP-gas cylinder
under or near this appliance.
b) NEVER fill the cylinder beyond 80
percent full.
c) If the information in "a" and "b" is not
followed exactly, a fire causing death
or serious injury may occur.
Gas Hook - Up
14