Attach propane gas tank to regulator inlet fitting by turning the regulator clockwise as
shown in figure below. LP gas cylinder must be fitted with a listed overfill prevention
device (OPD). Secure liquid propone gas cylinder to the slide out tray using the gas
cylinder retention screw.
1.
Put the gas tank into the gas tank tray. Then tighten the gas tank
retention kit for securing the gas tank as shown in the figure 1 below.
2.
Here are two buttons "A" and "B" on gas tank tray, the button "A" is used to
securethe gas tank tray, if you want to pull out the gas tank tray, please press
button "B" .
Figure 1
Assembly Instruction
Figure 2
11