Set Mode Items - Icom IC-M23 Instruction Manual

7
SET MODE

■ Set mode items

D Beep Tone function
Turn the key touch beep sound ON or OFF.
• OFF : For silent operation.
• ON : A beep sounds.
Beep tone ON (default)
D Priority Scan function
The transceiver has 2 scan types— normal (OFF) and pri-
ority (ON) scan. A normal scan searches all TAG channels
in the selected channel group. A priority scan sequentially
searches all TAG channels while monitoring Channel 16.
Normal scan (default)
18
"bP"
Push
Beep tone OFF
"Pr"
(Not available with Holland version)
Push
Priority scan
D Scan resume timer
The Scan resume timer can be set as a pause (OFF) or
timer scan (ON).
• OFF : When a signal is detected, the scan pauses on the channel
until the signal disappears, and then resumes.
• ON : When a signal is detected, the scan pauses on the channel
for 5 seconds, and then resumes.
Scan resume timer OFF
D Auto Scan function
The Auto Scan function automatically starts a normal or
priority scan when no signal is received, and no operation is
performed for 30 seconds.
Push
Auto scan OFF (default)
"St"
(Not available with Holland version)
Push
Scan resume timer ON
"AS"
(Not available with Holland version)
Auto scan ON