Set Mode; Set Mode Programming - Icom IC-M23 Instruction Manual

■ Set mode programming

The Set mode is used to change the settings of transceiver's
functions: Beep Tone function, Priority Scan function*, Scan
resume timer*, Auto Scan function*, Dual/Tri-watch function*,
Monitor key action, Automatic backlighting, LCD contrast
setting and Power Save function.
*Not available with Holland version.
SET MODE ITEMS
(The display shows the current settings, and the selected item is displayed in the dotted circle.)
• Beep Tone
Starting item
• Power Save
D Set mode operation
q Turn OFF the power.
w While holding down [VOL/SQL], turn ON the power to
e Push [VOL/SQL] to select a desired item. Or while holding
r Push [Y] or [Z] to select a desired option of the item.
t To exit the Set mode, push [16].
*
• Priority Scan • Scan resume timer*
or
: Push Push
: Push +
*Not available with Holland version.
• Automatic
backlighting
• LCD contrast

SET MODE

enter the Set mode.
• "bP" appears.
down [VOL/SQL], push [Y] or [Z] also selects an item.
• Auto Scan*
+
• Dual/Tri-watch*
• Monitor key action
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17