Fan/Blower System - Vermont Castings VHLDV500 Installation And Operating Instructions Manual

Resolution Direct Vent Gas Fireplace
electrical Grounding Instructions: this
appliance is equipped with a three-prong
(grounding) plug for your protection against
shock hazard and should be plugged directly
into a properly grounded three-prong
receptacle.
the black and white wires on the ac box
wiring harness are marked 'Blower', 'Light'
and 'aux'. It is important to use the wires
marked 'Blower' or the control will not work
correctly.
sIGnatuRe cOMManD BLOweR
To Junction Box
In Fireplace
Blower (300w Max)
The Blower requires the SCSACM A/C Module and the
TSFRSC remote operate this blower. Refer to remote in-
structions for operation.
26
{
Light WHITE
BLACK
WHITE
BLACK {
BLACK
Rear Burner
WHITE
Solenoid
Figure 33 -
BLOTKHLSC Blower Wiring Diagram
FP2705
BLOTKHLSC fan wiring
sIGnatuRe cOMManD - Fan BLOweR systeM
electrical connections should only be
performed by a qualified licensed electrician.
Main power supply must be turned off before
connecting the fan to the main electrical
power supply or performing service.
GREEN
Connector
Pin To Contro l Box
control Box
ac Module
FP2705
20300293