Specifications; Ec Declaration Of Conformity - Makita 2704 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Arbor hole
Blade diameter
Max. cutting capacities
No load speed (min
Table size (L x W)
Dimensions (L x W x H) with table(s) not extended
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Wear safety glasses.
･
Do not place hand or fingers close to
the blade.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for cutting in wood.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
90°
45°
-1
)
equipment and
environmentally compatible
(for European countries)
30 mm
260 mm
93 mm
64 mm
(665 mm - 1,045 mm) x (753 mm - 1,066 mm)
with sub tables (R) and (back)
715 mm x 753 mm x 344 mm
with sub tables (R) and (back)
34.9 kg
END215-4
without earth wire.
Noise
The typical A-weighted noise level determined according
to EN61029:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
For European countries only

EC Declaration of Conformity

We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
its
Table Saw
Model No./ Type: 2704
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
ENE003-1
EN61029
The technical documentation is kept by our authorised
representative in Europe who is:
ENF002-1
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
2
2704
(for other than European countries)
25 mm and 25.4 mm
255 mm
91 mm
63 mm
4,800
567 mm x (753 mm - 1,066 mm)
with sub table (R)
665 mm x 753 mm x 344 mm
with sub table (R)
29.5 kg
./II
) : 94 dB(A)
pA
) : 107 dB(A)
WA
Wear ear protection
Corporation as the
ENG905-1
ENH003-13
responsible