Switch Action - Makita 2704 Instruction Manual

the table surface. Then adjust the arrow pointer so that
its right edge is aligned to the 0° graduation.
006158

Switch action

For the lever type switch
ON
OFF
006217
CAUTION:
Before plugging in the tool, always be sure that the
•
tool is switched off.
To start the tool, raise the switch lever. To stop it, lower
the switch lever.
The hinged switch lever plate can be locked by passing
padlock through the hasp on the left hand side.
006216
For the button type switch
1
006163
1. Arrow pointer
1
1. Switch
1
1. Padlock
1
1. Switch
CAUTION:
Before operation, make sure that the tool is turned
•
on and off.
To start the tool, press the ON ( I ) button.
To stop it, press the OFF ( O ) button.
Sub table (R)
1
006149
006150
This tool is provided with the sub table (R) on the right
side of the main table. To use the sub table (R), raise
both levers on the front right side, pull out the table (R)
fully and then lower the levers to secure it.
When using the sub table (R ), locate the scale plate on
the sub table after loosening the screw on it with a
screwdriver so that it becomes successive with the scale
plate on the main table.
1
006162
7
1. Lever
1. Sub table (R)
1
1. Scale plate
2. Screw
2