Transport, E.g. When Moving - Bosch WFLI2440EU Instruction Manual And Installation Instructions

Transport,
e.g. when moving
Preparing and inserting
the transport bolts
Before transporting the washing machine
- Turn off the tap,
- reduce the water pressure in the water inlet hose
(see Page 23),
- drain any residual washing solution (refer to
Page 22),
- disconnect the washing machine from the power
supply,
- remove the hoses,
- install the lower 2 transport bolts.
Having transported the appliance and ensured
proper installation and connection, allow the Drain
programme to run through before starting the first
wash programme.
q Remove the 2 lower covers.
q Prepare the transport bolts:
Loosen the screw in the sleeve until the end of
the screw is level with the end of the sleeve.
q Through the open washing machine door have
a second person pull the top of the drum forwards.
Insert and tighten transport bolts 1 and 2.
The washer lugs must be located in the groove
in the rear panel of the housing.
35