Cleaning Water Inlet Strainers - Bosch WFLI2440EU Instruction Manual And Installation Instructions

Cleaning water inlet
strainers
d Risk of electric shock!
Do not immerse Aqua Stop safety device in water
(contains electrically operated valve).
This is necessary if very little or no water flows into the
washing machine.
First, reduce the water pressure in the inlet hose:
q Turn off the tap.
q Turn the programme selector to any programme
(except Spin and Drain).
q Press the Start button, and allow the programme
to run for approx. 40 seconds.
q Turn the programme selector to Off.
q Disconnect the hose from the water tap.
q Clean the filter with a small brush or paint brush.
q Connect the hose.
q Turn the tap on.
q Check whether water is leaking out of the end
of the hose connected to the tap.
If water is still discharged, check that the strainer
is attached properly.
23