Transport, E.g. When Moving - Bosch WFL 2090 Operating, Care And Installation Instructions Manual

d
WARNING
To reduce the risk of fire or electrical shock,
DO NOT use an extension cord or an adapter to
connect the washer to the electrical power
supply.
In the event that a ground fault circuit breaker is
to be used, only use types marked with the
following symbol: .
7
Only this symbol can guarantee compliance with all
current regulations.
Do not insert/remove the power cord with wet or
damp hands.
Handle the plug body only when removing the plug
from the socket.
34

Transport, e.g. when moving

d
Before transporting the washing machine:
- Turn off the water,
- Release the water pressure in the supply hose
(refer to page 22),
- Drain any remaining water (refer to page 20),
- Disconnect the washing machine from the
electrical outlet.
- Dismantle the supply and drainage hose,
- Install all transport bolts.
Having transported the appliance and ensured
proper installation and connection, allow the Drain
program to run through before starting the first
wash program.
Preparing and inserting the transport bolts
q Remove the 4 covers.
q Prepare the transport bolts:
Loosen the screw in the sleeve until the end of
the screw is level with the end of the sleeve.
q Insert and tighten transport bolts 1,2,3 and 4.
The lug on the washing machine must be
located in the groove in the rear panel of the
housing.