Channel Add/Del/Surf Setup - Zenith D60WLCD Installation And Operating Manual, Warranty

Channel Add / Del / Surf Setup
Create two different types of channel lists in memory : "Custom list" and "Surf
list" from the default channel list made in the EZ SCAN menu.
A custom list can be created by toggling each channel on or off with (Enter).
Once a channel is highlighted, you will be able to see whether the channel is
currently added or deleted by referring to the small window at the top-left cor-
ner of the screen.
You can create your own Surf list with up to 16 channels. It appears at the bot-
tom-left corner of the screen.
Press the Surf button on the remote control when a channel is highlighted to
add or delete the channel in the Surf list.
Press the MENU button on the remote
1
control, then use the UP/DOWN arrow
button to select the Setup menu.
Press ENTER or the RIGHT arrow button
2
to access the Setup menu.
Use the UP/DOWN arrows to select
3
Channel Add/Del/Surf and then press
ENTER or right arrow.
You will now see a screen filled with
4
channel numbers and a preview picture.
Use the UP/DOWN and LEFT/RIGHT
arrows to select a channel, then use
ENTER to add or delete it. Press SURF to
add the channel to the Surf list.
Press EXIT to save and return to TV view-
5
ing or press MENU to save and return to
the previous menu.
206-03726
vcr cable dvd sat
tv
mode light
source
antenna video
comp1
comp2
1 2
4 5
7 8
0
mute
vol ch
swap pipch- pipch+ pip
flashbk surf freeze
menu
1/5
record stop
pause rew play
power
front
rgb
3
6
9
2/3
enter
ratio
1/3/4
2/3/4
exit
5
skip
ff
P A G E 2 7