Aspect Ratio - Zenith D60WLCD Installation And Operating Manual, Warranty

Aspect Ratio

Press the MENU button on the remote
1
control, then use the UP/DOWN arrow
button to select the SPECIAL menu. Or
press RATIO button to instantly access
the Aspect Ratio menu.
Press ENTER or the RIGHT arrow button
2
to activate the Special menu.
Use the UP/DOWN arrows to choose
3
Aspect Ratio.
Press ENTER or the RIGHT arrow button
4
to move into the Aspect Ratio selection
menu. Use the UP/DOWN arrow buttons
to select the right ratio for your viewing
environment:
• Normal - Choose when you want to
view a picture with an original 4:3
aspect ratio, with black bars appear-
ing at both the left and right sides.
• Wide - Choose when you want to
adjust the picture horizontally, in a
linear proportion to fill the entire
screen. (Useful for viewing 4:3 for-
matted DVDs.)
• Panorama - Choose when you want to
adjust the picture in a non-linear pro-
portion, that is, more enlarged at
both sides, to create a spectacular
view.
• Zoom1 - Choose when you want to
view the picture without any alter-
ation. However, the top and bottom
portions of the picture will be
cropped.
• Zoom2 - Choose when you want the
picture to be altered, both horizontal-
ly extended and vertically cropped.
The picture taking a halfway trade off
between alteration and screen coverage.
5
Press EXIT to save and return to TV
viewing or press the ENTER button to
save and return to the previous menu.
P A G E 3 4
Lets you choose the way that an analog picture with a
4:3 aspect ratio is displayed on your TV with a 16:9 ratio.
When you receive an analog picture with a 4:3 aspect
ratio on your 16:9 TV, you need to specify how the pic-
ture is to be displayed according to your preference.
tv
mode
antenna
comp1
1
4
7
mute
swap pipch- pipch+ pip
menu
1
record stop
pause rew
vcr cable dvd sat
light power
source
video front
rgb
comp2
2 3
5 6
8 9
2/4/5
0
enter
1
ratio
vol ch
flashbk surf freeze
1/3/4
2/4
exit
5
skip
play ff
206-03726