Installing Harness System; Understanding Your Vehicle; Safety Tip - Safety 1st onBoard 35 Air User Manual

4358-5480 US S1 onBoard Air 10/1/10
C-12 Installing Harness System
1.
2.
2
3
1
3.
Failure to reinstall the harness system can result
in serious injury or death.
31
10:27 AM Page 33
Thread the Harness
Straps
Starting on the left side,
insert harness in the
harness slot, going through
both pad and shell.
Make sure you weave the
harness in and out of the
shell, between shell and
pad, as shown.
From the front, make
harness ends even with
each other.
Thread harness straps
through each buckle tongue
(1), thread through chest
clip (2) and push harness
ends through slots in the
seat back(3). Do not twist
the harness.
From the back of child
restraint, attach harness
straps to the splitter plate.
D-1 Understanding Your Vehicle
Your vehicle's features may be considerably different than
those pictured here. Consult your vehicle owner's manual to
help identify your vehicle's specific features and locations.
Seat Bight
Vehicle Seat Belts
Consult your vehicle
owner's manual for
vehicle belt use.
LATCH Anchors
Located in the seat
bight.

Safety Tip:

To help protect your vehicle seat's upholstery from
damage, use a single layered towel underneath and
behind child restraint.
To avoid your child being seriously burned,
take the following precautions:
1. Park in the shade or where sun does not directly
hit the child restraint.
2. Cover the child restraint with a sheet or blanket
when not in use.
3. Check for hot child restraint and buckles before
placing child in child restraint.
32
Air Bags
Consult your vehicle
owner's manual for
all air bag locations.