Head/Hip Roll Use; Reclining The Base; Removing Harness System - Safety 1st onBoard 35 Air User Manual

4358-5480 US S1 onBoard Air 10/1/10
C-8 Head/Hip Roll Use
1.
27
10:27 AM Page 29
To Remove Head/Hip
Roll
Undo the fastening strips
and pull the head/hip roll out
from behind the harness
straps.
To Attach Head/Hip Roll:
Undo the fastening strips
and fit the head/hip roll
behind the harness straps.
Refasten the fastening
strips.
For Smaller Infants
If your infant is small for its
age, place the head roll on
the outside of the pillows.
This will provide a snug fit
for your infant.
As your child grows, remove
the pillows.
For larger infants, the
hip/head roll can be
removed altogether.
C-9 Reclining the Base
The base has 3 recline positions. Use any of these to help
you achieve the recline angle needed for the weight of your
child.
1.
Pull out on the base
adjustment lever and
either lift or lower front of
base.
C-10 Removing Harness System
1.
Remove Harness
Straps from Splitter
Plate
Fully loosen harness
straps. Locate splitter
plate on the back of the
child restraint and
unfasten the harness
straps.
2.
Remove Harness
Straps
Pull harness through the
2
1
3 slots from the front (1).
Unthread harness from
the chest clip (2).
Unthread harness from
4
the buckle tongues (3).
Pull harness out of plastic
shell (4).
28