1. Manuals
  2. Brands
  3. McCulloch Manuals
  4. Brush Cutter
  5. MAC 250 L
  6. Instruction manual

McCulloch MAC 250 L Instruction Manual

Mcculloch mac 250 l grass trimmer instruction manual
Hide thumbs Also See for MAC 250 L:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
INSTRUCTION MANUAL
IMPORTANT INFORMATION
: Please read these instructions carefully and make
GB
sure you understand them before using this unit. Retain these instructions for future
reference.
MANUEL D'INSTRUCTIONS
RENSEIGNEMENTS IMPORTANTS:
Avant d'utiliser cet appareil, veuillez lire
FR
atentivement les instructions et assurez- -vous de les avoir comprises. Conservez
les instructions pour référence ultérieure.
BETRIEBSANWEISUNG
WICHTIGE INFORMATION:
Lesen Sie diese Hinweise zur Handhabung des
DE
Geräts aufmerksam durch. Verwenden Sie es erst, wenn Sie sicher sind, daß Sie
alle Anweisungen verstanden haben und gut aufbewahren.
MANUAL DE INSTRUCCIONES
INFORMACIÓN IMPORTANTE:
ES
Lea atentamente las instrucciones y
asegúrese de entenderlas antes de utilizar esta aparato. Conserve las instruc-
ciones para la referencia en el futuro.
115307426
Rev. 3 11/30/10 BRW

Advertisement

Table of Contents
loading

Related Manuals for McCulloch MAC 250 L

Summary of Contents for McCulloch MAC 250 L

  • Page 1 INSTRUCTION MANUAL IMPORTANT INFORMATION : Please read these instructions carefully and make sure you understand them before using this unit. Retain these instructions for future reference. MANUEL D’INSTRUCTIONS RENSEIGNEMENTS IMPORTANTS: Avant d’utiliser cet appareil, veuillez lire atentivement les instructions et assurez- -vous de les avoir comprises. Conservez les instructions pour référence ultérieure.

  • Page 2: Identification Of Symbols

    IDENTIFICATION (WHAT IS WHAT?) 1. Fuel tank 12. Throttle trigger 2. Loop handle 13. Throttle lock- -out 3. ON/STOP switch 14. Starter handle 4. Shoulder strap clamp 15. Fuel cap 5. Shoulder strap 16. Primer bulb 6. Trimmer head 17. Choke lever 7.

  • Page 3: Safety Rules

    WARNING! This brushcutter can be dangerous! Careless or improper use can cause serious or even fatal injury. B. Read and understand the instruction manual before using the brushcutter. C. Always use: Ear protection, eye protection, head protection, boots, and gloves. DANGER! Blade can thrust violently away from material it does not cut.

  • Page 4: Operator Safety

    S Maintain unit according to recommended procedures. Keep blade sharp. Keep cut- ting line at the proper length. S Use only 2,4 mm diameter McCulloch brand replacement line. Never use wire, rope, string, etc. S Install required shield properly before using OPERATOR SAFETY the unit.

  • Page 5: Special Notice

    S Hold the unit firmly with both hands. S Store unit so line limiter cannot accidentally S Keep firm footing and balance. Do not cause injury. Unit can be hung by the shaft. overreach. S Always install transport guard on blade be- S Keep blade or trimmer head below waist fore transporting or strorage.
  • Page 6 HARNESS ADJUSTMENT FOR BALANCE 15 cm 3. Make a final adjustment of the handle to a below 10 -- 30 cm comfortable working position. Tighten the waist above nut firmly with wrench (provided). ground 76 cm ASSEMBLY OF SHOULDER STRAP Proper shoulder strap and handlebar adjust- ments must be made with the engine com- pletely stopped before using unit.
  • Page 7 Gearbox Shield Dust cup Bolt Retaining washer CONFIGURING YOUR UNIT NOTE: Make sure all parts are properly You can configure your unit using a cutting head installed as shown in the illustration before for grass and light weeds, or a weed blade for installing the trimmer head.
  • Page 8 These dust cup or the retaining washer. parts must be provided by McCulloch and 6. Align hole in dust cup with hole in side of installed as shown below. Failure to use proper parts can cause the blade to fly off and seriously gearbox by rotating the blade.

  • Page 9: Operation

    OPERATION STARTING A COLD ENGINE (or a WARNING: Be sure to read the fuel warm engine after running out of fuel) information in the safety rules before you be- gin. If you do not understand the safety rules, Starting position do not attempt to fuel your unit.

  • Page 10: Starting A Warm Engine

    8. Pull starter rope sharply until engine runs, S Wear eye protection and heavy clothing. but no more than 6 pulls. If the engine S Extend your left arm and hold handlebar doesn’t start after 6 pulls (at the HALF grip with your left hand.
  • Page 11 Tip of line does Line crowded into Mowing the cutting. work area. Right Wrong SWEEPING - - The fanning action of the rotat- ing line can be used to blow away loose debris from an area. Keep the line parallel to and S The line will easily remove grass and weeds from around walls, fences, trees and flower above the area surface and swing the tool...

  • Page 12: Maintenance

    such as stumps, rocks, fences, metal, etc., or Always release the throttle trigger and allow clusters of hard, woody brush having a engine to return to idle speed when not cut- diameter greater than 1 cm. ting. The blade should not turn while the en- S Keep the blade sharp.

  • Page 13: Replace Spark Plug

    4. Replace with a pre-wound spool, or re- place line using a 4,5 meters length of 2,4 mm diameter McCulloch brand line. WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

  • Page 14: Blade Replacement

    8. Position the lines in the guide slots. Guide slot Guide slot BLADE REPLACEMENT Refer to the ASSEMBLY section for blade re- placement instructions and illustrations. CARBURETOR ADJUSTMENT 9. Place the spool in the cover as shown WARNING: Keep others away when below.

  • Page 15: Seasonal Storage

    If you require further assistance or are unsure Idle Speed Screw about performing this procedure, contact an authorised service dealer. Air Filter Cover STORAGE ENGINE WARNING: Perform the following S Remove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through steps after each use: S Allow engine to cool before storing or trans- the spark plug opening.
  • Page 16 TROUBLESHOOTING TABLE WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit. TROUBLE CAUSE REMEDY Engine will not 1. ON/STOP switch in STOP 1. Move ON/STOP switch to ON start.

  • Page 17: Declaration Of Conformity

    We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46- -36- -146500, as authorised representative in the Community, declare that the brushcutter model McCulloch Mac 250 L with serial numbers dating from 2009 and onwards (the year is clearly stated on the rating plate, followed by the serial number), comply with the requirements of the COUNCIL’S...

  • Page 18: Technical Data Sheet

    (standard deviation) of 1 dB(A). Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s Model Mac 250 L (3/8 LH arbor shaft thread) Centre hole in blades/cutters, ∅ 25,4 mm Approved accessories Type Cutting attachment /guard, part.

This manual is also suitable for:

Macl

Table of Contents