Mac Address Table Filter; Lacp Command; Lacp Port - Planet WGSW-28040 User Manual

Vid :vid
port_list : Port list or 'all'
Example:
To set static MAC address:
WGSW-28040(config)# mac-address-table static 00:30:4F:11:22:33 vlan 1 port 1

MAC Address Table Filter

Description:
Set MAC addressf ilter
Syntax:
Mac-address-table filter <source|destination|both> <A:B:C:D:E:F> vlan <vid> <name>
Parameters:
source : Source MAC address filter
destination : Destination MAC address filter
both : Source and Destination MAC address filter
A:B:C:D:E:F :MAC address xx:xx:xx:xx:xx:xx
Vid :vid
name : Entry name, maximum 32 characters
Example:
To MAC address filter:
WGSW-28040(config)# mac-address-table filter both 00:30:4f:11:22:33 vlan 1 123

6.3.15 LACP Command

LACP Port

Description:
Set LACP port configuration
Syntax:
lacp port <port_list> <active|passive>
Parameters:
port_list : Port list or 'all'
active :LACP active
passive :LACP passive
Example:
To set LACP port configuration:
User's Manual of WGSW-28040 / 28040P / 28040P4
278