Port Isolate - Planet WGSW-28040 User Manual

4.5.10.3 Port Isolate

The diagram shows how the Managed Switch handles isolate and promiscuous ports, and the each PCs are not able to access
each other PCs of each isolate port. But they all need to access with the same server/AP/Printer. The screen in
appears. This section will show you how to configure the port for the server – that could be accessed by each isolate port.
Setup steps
1. Assign egress port list :
Protected port list: Port-1~Port-4
Unprotected port list: Port-5~Port-28
The screen in Figure 4-5-27 appears.
Figure 4-5-27 Protected port setting
User's Manual of WGSW-28040 / 28040P / 28040P4
116
Figure 4-5-26