Planet WGSW-28040 User Manual page 113

Figure 4-5-21 Add new VLAN group, assign VLAN members for VLAN 2 and VLAN 3 and remove specify ports from VLAN 1
It's important to remove the VLAN members from VLAN 1 configuration. Or the ports would become
overlap setting. ( About the overlapped VLAN configuration, see next VLAN configure sample)
4. Assign PVID for each port:
Port-1,Port-2 and Port-3 : PVID=2
Port-4,Port-5 and Port-6 : PVID=3
The Per Port VLAN configuration in
User's Manual of WGSW-28040 / 28040P / 28040P4
member
Figure 4-5-22 appears.
Figure 4-5-22 Port 1-Port 6 VLAN Configuration
113