Advertisement
Quick Links
7-1/4˝ CIRCULAR SAW WITH LASER
performance
performance
plus
plus
MODEL: 8307L
INSTRUCTION MANUAL
COPYRIGHT © 2004 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
IMPORTANT INFORMATION
2-YEAR
LIMITED WARRANTY
FOR THIS CIRCULAR SAW
PROOF OF PURCHASE
Please keep your dated proof of purchase for warranty and servicing purposes.
REPLACEMENT PARTS
Most replacement parts for this tool are available at our authorized KING CANADA
service centers across Canada. For servicing, contact or return to the retailer where
you purchased your product along with your proof of purchase.
LIMITED TOOL WARRANTY
KING CANADA makes every effort to ensure that this product meets high quality
and durability standards. KING CANADA warrants to the original retail consumer a
2-year limited warranty as of the date the product was purchased at retail and that
each product is free from defects in materials. Warranty does not apply to defects
due directly or indirectly to misuse, abuse, negligence or accidents, repairs or
alterations and lack of maintenance. KING CANADA shall in no event be liable for
death, injuries to persons or property or for incidental, special or consequential
damages arising from the use of our products. To take advantage of this warranty,
the product or part must be returned for examination by the retailer. Shipping and
handling charges may apply. If a defect is found, KING CANADA will either repair
or replace the product.
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts
diagram and parts list.
KING CANADA TOOLS
OFFERS A 2-YEAR LIMITED WARANTY
FOR NON-COMMERCIAL USE.
Advertisement
Related Manuals for King Canada 8307L
Summary of Contents for King Canada 8307L
-
Page 1: Important Information
If a defect is found, KING CANADA will either repair or replace the product. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list. performance... -
Page 2: General Safety Instructions
GENERAL SAFETY INSTRUCTIONS SPECIFIC SAFETY INSTRUCTIONS FOR POWER TOOLS FOR CIRCULAR SAWS Snagging the lower guard on a surface • Check lower guard for proper closing 1. KNOW YOUR TOOL. Read and 10. ALWAYS WEAR SAFETY GLASSES. below material being before each use. -
Page 3: Electrical Safety
ELECTRICAL SAFETY CAUSES & OPERATOR PREVENTION OF KICKBACK CAUSES & OPERATOR PREVENTION check that the saw teeth are not WARNING! OF KICKBACK engaged into the material. If the saw ALL ELECTRICAL CONNECTIONS MUST BE DONE BY A QUALIFIED blade is binding it may walk up or ELECTRICIAN. - Page 4 LASER GUIDE SYSTEM ASSEMBLY/ADJUSTMENTS & MAINTENANCE Warning! Always unplug saw from power source before any of the following operations or USING THE LASER GUIDE SYSTEM instructions. Warning! Do not stare directly into the laser beam. 1. Mark the line of the cut on the workpiece. ATTACHING BLADE 2.